Detergent Thickener Hydroxypropyl Methyl Cellulose Ether HPMC
Nnukwu viscosity HPMC hydroxypropyl methyl cellulose Ọkpụrụkpụ Maka ntụ ntụ putty:
1) Ọdịdị: HPMC bụ nonionic cellulose ether, ọcha grayish-acha ọcha ntụ ntụ ma ọ bụ granule, odorless na flavorless, soluble na mmiri oyi, glacial acetic acid, ethanol, methanol na propylene glycol, ubé soluble na acetone dabere n'ókè nke nnọchi, ọ fọrọ nke nta ka ọ ghara ịsacha ya na mmiri ọkụ, ethylene glycol na toluene. A na-agbaze HPMC na ngwakọta nke methanol 10% na 90% methylene chloride iji mepụta ngwọta colloidal.
2) Ngwọta nke HPMC nwere ọrụ elu, nghọta dị elu, na arụmọrụ kwụsiri ike. Mgbe ikpo ọkụ na ụfọdụ okpomọkụ, ngwọta na-aghọ urukpuru ma ọ bụ mepụta flocculent gel. Otú ọ dị, ngwọta na-apụta ìhè ọzọ mgbe jụrụ oyi. Ụdị HPMC dị iche iche nwere okpomọkụ gelation dị iche iche. Solubility dị iche na viscosity. Na ala viscosity, elu solubility ọ nwere. Ụdị HPMC dị iche iche dị iche iche na ụfọdụ ihe onwunwe na mmiri adịghị emetụta pH.
3) nha urughuru: 100% ngafe ọnụego na 80 ntupu.
4) Njupụta pụtara ìhè: 0.25-0.70 g/mL (na-emekarị ihe dị ka 0.5 g / mL), njupụta kpọmkwem 1.26-1.31mL.
5) Agba mgbanwe okpomọkụ: 190-200 ° C; Carbonization okpomọkụ:280-300C.
6) Esemokwu dị n'elu: 42-56 dyn / cm (2% ngwọta mmiri).
7) The elu methoxy ọdịnaya na HPMC, ala gelation okpomọkụ, na elu solubility na mmiri na elu ọrụ.
8) HPMC nwere ụfọdụ ndị ọzọ e ji mara, dị ka ihe atụ, ndim ihe onwunwe, pH kwụsie ike, njigide nke mmiri, magburu onwe film-akpụ ihe onwunwe, ezi gbasasịrị na adhesion ikike.
2) Ngwọta nke HPMC nwere ọrụ elu, nghọta dị elu, na arụmọrụ kwụsiri ike. Mgbe ikpo ọkụ na ụfọdụ okpomọkụ, ngwọta na-aghọ urukpuru ma ọ bụ mepụta flocculent gel. Otú ọ dị, ngwọta na-apụta ìhè ọzọ mgbe jụrụ oyi. Ụdị HPMC dị iche iche nwere okpomọkụ gelation dị iche iche. Solubility dị iche na viscosity. Na ala viscosity, elu solubility ọ nwere. Ụdị HPMC dị iche iche dị iche iche na ụfọdụ ihe onwunwe na mmiri adịghị emetụta pH.
3) nha urughuru: 100% ngafe ọnụego na 80 ntupu.
4) Njupụta pụtara ìhè: 0.25-0.70 g/mL (na-emekarị ihe dị ka 0.5 g / mL), njupụta kpọmkwem 1.26-1.31mL.
5) Agba mgbanwe okpomọkụ: 190-200 ° C; Carbonization okpomọkụ:280-300C.
6) Esemokwu dị n'elu: 42-56 dyn / cm (2% ngwọta mmiri).
7) The elu methoxy ọdịnaya na HPMC, ala gelation okpomọkụ, na elu solubility na mmiri na elu ọrụ.
8) HPMC nwere ụfọdụ ndị ọzọ e ji mara, dị ka ihe atụ, ndim ihe onwunwe, pH kwụsie ike, njigide nke mmiri, magburu onwe film-akpụ ihe onwunwe, ezi gbasasịrị na adhesion ikike.
Ngwaahịa Youngcel gụnyere ụdị ngwaahịa mmiri niile dị ka ndị na-ehicha ala, ihe ncha na ngwaahịa ịsa efere nwere pH n'etiti. 6- 8
Na-eto etoNke al enwere ike iji ya dị ka onye na-agba agba iji dozie rheology nke ncha mmiri mmiri, gbanwee ka ọ dị mma na ọdịdị dị mma.
Na-eto etoNke al na-eme ka usoro viscous na ndị na-ehicha gel bụrụ ihe bara uru ma dị mma karị, n'ihi na Na-eto etoNke al ga-ahapụ ndị na-ehicha gel na-ahapụ n'elu ma na-arụ ọrụ ruo ogologo oge, ya mere nsonaazụ nhicha dị mma.
- Thickening effects
- Adjustment of consistency
- Compatibility with ionic surfactants
- Solutions of high transparency
Dee ozi gị ebe a ziga anyị ya